Hi. Got your email about the reservoir
I bought from you off of ebay. I used it on a '42 Chevy I'm working on
for a friend. He mounted his power brake reservoir right under the
floor board with hardly no access to it so I added your remote
reservoir and tapped a fitting into the top of his filler cap. The only
thing I noticed was that your cap turned a little hard right at the end
before it sealed. No big deal though after it was mounted and sealed
for awhile. That's it. Jay Roszman
|
|
Jim Bartley, Malpeque, Prince Edward
Island
1949 Kaiser Special 4dt
or 1957 Studebaker Champion 4 dr.
I'm adapting your kit for
use in one of my under-the-floor master cylinders on one of the antique
cars, because they are a bit of a pain to top up. Won't be done til
Spring, of course. Cheers!
Jim
|
(No photo)
|
Nick Smith
Parachute, CO
I installed your kit in
my CJ5 rock crawler with dual master cylinder. Worked perfectly.
|
|
Larry Mikelson
Belmont, CA
1964 CJ5
No pictures available
The connection to the master cylinder cover leaked and I
decided to abandon the project and put in a new master cylinder without
the remote reservior.
|
(No
photo) |
One complaint (lost the reference)
Customer complained via
eBay feedback rating that the reservoir outlet collapsed. He over
tightened the hose clamp.
|
(No
photo) |
The truck is a work in progress, so I
haven't used the reservoir yet. It will be used for the installation
of a hydraulic clutch into a 1967 Chevy P/U that was not originally equipped
with one. I'll let
you know how it all works out when the project is complete in spring.
Tom Drummer
|
(No
photo) |